Beckhoff Automation tf5000

TwinCAT?3 NC PTP 10 Axes implements motion control for point-to-point movements in software. The axes are represented by axis objects and provide a cyclic interface, e.g. for the PLC. This axis object is then linked to a corresponding physical axis. In this way, the most diverse axis types with the most diverse fieldbus interfaces can be connected in an abstract way with the axis objects, which always offer an identical configuration interface. Control of the axes can be implemented in various configurations (position or velocity interface) and various controllers. The axes are configured in TwinCAT Engineering. Features up to 10 axes, extendable to a max. of 255 axes supports electrical and hydraulic servo drives, frequency converter drives, stepper motor drives, DC drives, switched drives (fast/slow axes), simulation axes and encoder axes supports various fieldbus interfaces like EtherCAT (CoE, SoE) standard axis functions such as start/stop/reset/reference, velocity override, master/slave couplings, electronic gearbox, online distance compensation programming is carried out via PLCopen-compliant IEC?61131-3 function blocks convenient axis commissioning options online monitoring of all axis state variables such as actual/setpoint values, releases, control values online axis tuning configuration of all axis parameters, such as measuring system, drive parameters and position controller configurable controller structures: P control, PID control, PID with velocity pre-control, PID with velocity and acceleration pre-control online master/slave and slave/master conversion flying saw cam plates (support by TwinCAT?3 CAM Design Editor [optional]) flexible implementation of customer-specific motion profiles with external reference value input from the PLC multi-master coupling OMAC PackML PLC library