Beckhoff Automation ep3174-0092

The EP3174-0092 EtherCAT Box has four analog inputs which can be individually parameterized, so that they process signals either in the -10°≠+10?V or the 0/4°≠20?mA range. The voltage or input current is digitized with a resolution of 16?bits, and is transmitted (electrically isolated) to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The input filter and therefore the conversion times are configurable in a wide range. If required, the inputs can be scaled differently, and automatic limit monitoring is also available. EtherCAT is used for parameterization purposes. The parameters are stored in the module. With the aid of the TwinSAFE?SC technology (TwinSAFE Single Channel) it is possible to make use of standard signals for safety tasks in any network or fieldbus. To do this, EtherCAT I/Os from the areas of analog input, position measurement or communication (4°≠20?mA, incremental encoder, IO-Link, etc.) are extended by the TwinSAFE?SC function. The properties typical for the signals and the standard functions of the I/O components are retained. TwinSAFE?SC I/Os differ optically from standard I/Os by a yellow stripe on the front of the housing. The TwinSAFE?SC technology enables communication via a TwinSAFE protocol. These connections can be distinguished from the usual secure communication via Safety over EtherCAT. The data from the TwinSAFE?SC components is fed via a TwinSAFE protocol to the TwinSAFE Logic, where it can be used in the context of safety-relevant applications. Detailed examples confirmed/calculated by the T®πV S®πD for the correct application of the TwinSAFE?SC components and the respective normative classifications can be found in the TwinSAFE application manual.